"Talyner" Thinning Shear

When a regular Thinning Shear is opened or closed, the blades and the Teeth form a V.

The top teeth align perfectly as they close, but the Teeth at the bottom cross each other until they come to a rest. The hair is crushed and bruised. In a day or two, will split. Leaving a rough and frizzy finish.

The "TALYNER" Thinning Shear  will function correctly without any damage to the hair follicles and leave a perfect and naturally "soft" finish with no marks.

1) The Teeth on one blade are longer than usual and 'comb' up the hair & allow plenty of room for the un-cut hair to fall through. The Teeth on the other blade are short and align perfectly from top to bottom to cut precisely at the tips of the longer teeth.

2) The longer Teeth are straight at the top and have a gradually increasing Curve as they get nearer to the screw.

This prevents the hair being crushed and broken as with regular Thinners.

3) Both Blades are deeply concaved and extremely Sharp giving a clean precise cut without bruising or damage. No Friction damage.

4) The handles are ergonomically designed for hand comfort and control. 'Straight line' handles prevent 'rolling' when you cut. The thumb-Hole is bent to fit naturally.

5) The Shear runs on our own Ball-Bearing mechanism that is Smooooooth and true.

6) Shiny Blades for easy cleaning & and Satin Handles for grip. We topped the Ball-Bearing with a 'Swarofski Crystal.' (Just cos we could:)



Enjoy this remarkable Thinning Shear with the knowledge that it will always give you the best professional finish. 

We welcome your questions. Toll Free: 1-888-235-0864